Competition Systems
Emtron SL Series Connector Kit
This kit includes both ECU connectors with terminals as well as the Lemo 1B Connector used to interface with a PC.
The PC connector comes pre terminated with a 600mm flying lead.
$110.00
Renault 2.0 16v F4R / F7R & 1.8 16v F7P PEC Steel Connecting Rods
PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).
$975.00
GM Performance Flex-Fuel Sensor 13577394
These flex-fuel sensors make it easy to run either E85, pump premium or any other kind of race fuel without the need to remap every time you change fuels.
$175.00
Citroen/Peugeot 206 GTI EW10J4/J4S High Comp Wossner Forged Piston Kit
High CR dome top pistons to suit Peugeot/Citroen EW10J4 and EW10J4S engines most commnoly found in Peugeot 206gti/gti180
$1,182.50
Fuse MAXI Blade Type 32VDC 30A Slow with LED Indicator
Day or night when a fuse blows, the fuse lights up to indicate immediately which fuse needs replacing which saves time and effort.
$10.45
Fuse MAXI Blade Type 32VDC 40A Slow with LED Indicator
Day or night when a fuse blows, the fuse lights up to indicate immediately which fuse needs replacing which saves time and effort.
$10.45
Fuse MAXI Blade Type 32VDC 60A Slow with LED Indicator
Day or night when a fuse blows, the fuse lights up to indicate immediately which fuse needs replacing which saves time and effort.
$10.45
MIL-W-22759/32-12 12AWG Wire
Cross linked ETFE insulation and tin palted copper conductor gives this wire a heat rating up to 150Deg C. 12AWG is commonly used for high current ancillary applications such as cooling fans.
$5.75
MIL-W-22759/32-16 16AWG Wire
Cross linked ETFE insulation and tin palted copper conductor gives this wire a heat rating up to 150Deg C. 16AWG is commonly used for high current ancillary applications such as fuel pumps and CDI units.
$4.75
MIL-W-22759/32-20 20AWG Wire
Cross linked ETFE insulation and tin palted copper conductor gives this wire a heat rating up to 150Deg C. 20AWG is commonly used for ignition coils, fuel injectors and moderate power consumption devices.
$2.20
MIL-W-22759/32-22 22AWG Wire
Cross linked ETFE insulation and tin palted copper conductor gives this wire a heat rating up to 150Deg C. 22AWG is commonly used for fuel injectors and sensors.
$2.10
MIL-W-22759/32-24 24AWG Wire
Cross linked ETFE insulation and tin palted copper conductor gives this wire a heat rating up to 150Deg C. 24AWG is commonly used for sensors in light weight harnesses.
$1.65